Raider NSN 3HD 2805-01-652-3076, Руководство пользователя

Страница: 40 / 78

SECTION 2
Owner’s Manual Standard Operating Procedures
30
S
TARTING THE
R
AIDER
50 HP
The primary means to start the motor is by using the recoil starter. The recoil starter is mounted to the
top of the powerhead with the T-Handel pull cord grip fed through the opening in the forward part of
the motor cowling. A mechanical safety mechanism prevents the motor form starting unless the gear
select lever is in the neutral position.
The secondary means to start the motor is by using the engine start push button. This button is located
on the front portion of the lower engine cover. When pressed it engages the starter motor to start the
engine. This method of starting is normally used when under duress or prevailing conditions prevent
motor start by the primary method.
The tertiary means to start the motor is used only when the primary and secondary have failed. The
engine cowling is removed to gain access to the Recoil Starter. Using tools provided in the Emergency
Tool Kit, the recoil starter is removed. Using the cord provided in the Emergency Tool kit, wrap it around
the starter pully. When the cord is fully wrapped around the starter pully, simply pull the end to start.
When using this method, the motor will start in gear.
Starting Procedure.
1.
Connect the fuel connector to the engine
2.
Feed fuel to the carburetor by squeezing the
primer bulb until firm.
3.
Install the safety lock in the stop switch (lanyard).