RAIDExpress 133 RAID USER MANUAL
35
RAID Card Configuration
Press “5” on the
Main Menu
then the
RAID Card Configuration
menu will appear.
You can use arrow keys
→
and
←
and the “space” bar key to enable or disable
Auto-Rebuild option.
When Auto-Rebuild enables, the RAIDExpress 133 card can rebuild your mirrored
array automatically. If a failed mirrored drive is replaced without shutting down your
PC, the RAIDExpress 133 card can detect the hot-swap action and start rebuilding
automatically. When Auto-Rebuild is disabled, you need to rebuild your mirrored
array manually from
(Please refer to page 76) or from
(Please refer to page 30).
Note: You need to install removable docking case to support hard drive
hot-plug.
On the
RAID Card Resource
section, you can see the PCI slot interrupt and I/O port
address used by the RAIDExpress 133 card. You can also see the status of each
hard drive from the
Drive Status
section. For the meanings of “Channel ID”, “Drive
