RAIDExpress 133 RAID USER MANUAL
21
Define RAID
Click “2” on the
Main Menu
then you can enter the
Define RAID Menu
. Please use
arrow keys
↑
and
↓
to highlight the array number you want to define; use the
“space” key to specify the bootable array if you would like to boot your system from
array attached on RAIDExpress 133 controller; and click the “Enter” key to select it
and enter the
Define RAID Sub-Menu
to create your array. If you want to quit and go
, please click the “Esc” key.
When an array is not assigned a RAID level, you will see “
” on the raw.
Column “Array Mode” shows the RAID level (Stripe, Mirror, Mirror or JBOD)
assigned to the array. Column “Drive No” shows the number of hard drive included in
the array. Column “Size” shows the array’s total capacity. If there is a symbol
shown in front of “Size”, the capacity unit is gigabyte. Column “Status” shows array
status. You will see “Functional” if the array is operational and “Non-Functional” if the
array has lost its functionality.
Please highlight the array number you want to define and click the “Enter” key, then
the
Define RAID Sub-Menu
will appear and allow drive assignments to the array.
