RAID N8103-134, Руководство по установке

Страница: 69 / 80

856-127900-408- B
68
3-2-3. Setup the N8103-135 <Windows Server 2003>
This section explains how to setup the N8103-135.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-014(5.10-014.05 or later),
5.10-017 or later, connect the N8103-135 to the server and execute "Updating the System".
After rebooting the server, the setup is completed.
If the NEC EXPRESSBUILDER provided with the server is Version 5.10-016, setup according to the
procedure below.
If the RAID Controller (N8103-134) is used
You do not need to install the driver manually. It is automatically installed by Windows Plug-and-Play.
If the RAID Controller (N8103-134) is not used
Please install the driver by the following procedures.
Note :
If you use the N8103-115, need to complete setup of the N8103-115 before Setup the N8103-135.
To setup the N8103-115 according to the
「
User's Guide
」
provided with the server.
1. Boot the system and log in it using the user name to which an authority of administration is assigned
(e.g. administrator). If the [Found New Hardware Wizard] is booted, click [Cancel].
When this Wizard is not booted, go to Next.
2. Start [Computer Management].
3. Double-click the [RAID Controller] which Device Manager lists as [Other device].
4. Click
[Update Driver].
5. When the [Update Device Driver Wizard] appears, select [No, not this time] and click [Next].
6. Select [Install from a list or specific location [Advanced] and click [Next].
7. Select [Don't search. I will choose the driver to install] and click [Next].
8. Select [SCSI and RAID controller] and click [Next].
9. Click [Have Disk..].
10. Insert
「 NEC EXPRESSBUILDER 」 DVD into the optical disk drive. Enter a path to the folder in the
NEC EXPRESSBUILDER DVD into [Copy manufacturer's files from:] and click [OK].
- Windows Server 2003 (32-bit) (including R2)
<drive letter>:¥016¥win¥winnt¥oemfd¥dotnet¥fd1
- Windows Server 2003 (64-bit) (including R2)
<drive letter>:¥016¥win¥winnt¥oemfd¥w2k3amd¥fd1
11. Specify the following driver and click [Next].
「
Promise SuperTrak SAS 6G RAID Controller
」
Note:
If the [Found New Hardware Wizard] is booted, click [Cancel]. When this Wizard is not booted, go
to step 12. If you have click [Cancel], the following message is displayed. It is not a problem in
operating the system.