RAFTEC SAFE Series, Инструкция по эксплуатации

Страница: 7 / 28

7
EN
6. OPERATING INSTRUCTIONS
1. Filter should be used without pressure and
temperature excess, specified in table with technical
characteristics.
2. In case of using filter in pipe system with high quantity
of mechanical dirt, it is recommended to make
regular inspection and cleaning of filter. Necessity of
inspection could be determined by pressure reduction
more than 0.05 MPa after filter output.
3. For cleaning of filter it is needed to close stop valve
of pipe system, remove area with filter and after
that, screw off plug and clean metal grid. If during
inspection and cleaning gasket was damaged, it
should be replaced.
CORRECT NOT CORRECT
Figure 1. Correct and not correct ways
of filter installation