4
1. Press [learning] key 3 seconds
till the light is on. The controller
enters into record state.
3. Press [channel choose]
button, do not release. Then
press [Stop] button one time.
FCC Information
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: 1) this device may
not cause harmful interference, and 2) this device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try correct the interference by
one or more of the following measures:
-
Reorient the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into and outlet on a circuit
