3
If want to reset all the channels, please delete the remote
channels firstly, then reset.
When the work direction of the motor is different from the
control direction, you needn’t change the cable connection. You can
only correct the direction on the transmitter.
Application Example
YR1226 radio transmitter and AR8611 radio receiver setting steps:
Setting remote channel
1. Press [Learning]
key 3 seconds till the
light is on, the
controller enters into
record state
.
2. Press [channel
choose] button on
the transmitter,
choose the needed
channel.
3. Press [channel
setting] key on the
back of the
transmitter. The
channel will be
recorded.
Delete remote channel
1. Press [learning] key 3 seconds
till the light is on. The controller
enters into record state.
2. Re-press [learning] key 7
seconds till the light is off.
Correct the direction
