Rae RAEPoint, Руководство по установке

Страница: 11 / 25

8
6.2 DC-Powered Wireless Alarm Bar Wiring
The RAEPoint DC-Powered Wireless Alarm Bar already has
most wiring done at the factory. It is only necessary to connect
the positive and negative DC power supply wires and
grounding (according to local requirements). Power and
internal grounding wires must be fed through a connector at the
bottom of the unit.
Note: Ensure that only the correct listed or certified cable
glands (not included) are used and that the assembly is
correctly grounded (earthed). All cable glands should be
of an equivalent IP rating to that of the unit and integrated
with the unit so that this rating is maintained.
IMPORTANT!
Prior to factory shipment, the RAEPoint is tested.
However, the instrument should be tested after
installation.
Wires must be fed
in through an M25
threaded insert
(ATEX)