Radyne DMD20 LBST Скачать руководство пользователя страница 293

Страница: 293 / 306

DMD20/20LBST Universal Satellite Modem

Drop and Insert (D&I)

MN-DMD20-20LBST Revision 14

H–15

ROM Map 2 could be used as the template for an Active Receive (Insert) Map within a

demodulator configured for 128 Kbps operation. The demodulated data in the receive path would

be inserted into the first two time slots of the T1 or E1 frame. The Insert Multiplexer would know

to look only at the first two entries in the Active Receive table and would ignore the other 28

entries. If the first two entries were modified to contain a 27 and 28, the data would be inserted

into the 27

and 28

time slots of the E1 frame.

ROM Map 3 could be used as the template for an Active Transmit (Drop) Map with a modulator

and/or demodulator configured for 256 Kbps operation. The T1 or E1 Data in the transmit path or

the demodulated data in the receive path would be dropped from and/or inserted into the first four

time slots of the T1 or E1 frame. The Multiplexer would know to look only at the first four entries

in the Active map(s) and would ignore the other 26 entries.

ROM Map 4 could be used as the template for an Active Transmit (Drop) or Active Receive

(Insert) Map with a modulator and/or demodulator configured for 384 Kbps operation. The T1 or

E1 Data in the transmit path or the demodulated data in the receive path would be dropped from

and/or inserted into the first six time slots of the T1 or E1 frame. The Insert Multiplexer would

know to look only at the first six entries in the Active map(s) and would ignore the other 24

entries. To Drop the last six channels of a T1 frame into a modulator transmit path, the first six

entries of the Active Transmit map should contain 19, 20, 21, 22, 23, and 24.

ROM Map 5 could be used as the template for an Active Transmit (Drop) and/or Active Receive

(Insert) Map with a modulator and/or demodulator configured for 512 Kbps operation. The T1 or

E1 Data in the transmit path or the demodulated data in the receive path would be dropped from

and or inserted into the first eight time slots of the T1 or E1 frame. The Multiplexer would know to

look only at the first eight entries in the Active map(s) and would ignore the other 22 entries.

To insert data received from a demodulator into channels 17 through 24 of an E1 frame, the first

eight entries of the Active Receive map should contain 17, 18, 19, 20, 21, 22, 23, and 24.

ROM Map 6 could be used as the template for an Active Transmit (Drop) and/or Active Receive

(Insert) Map with a modulator and/or demodulator configured for 768 Kbps operation. The T1 or

E1 Data in the transmit path or the demodulated data in the receive path would be dropped from

and or inserted into the first 12 time slots of the T1 or E1 frame. The Multiplexer would know to

look only at the first 12 entries in the Active map(s) and would ignore the other 18 entries. To

insert data received from a demodulator into channels 3 through 14 of an E1 frame, the first 12

entries of the Active Receive map should contain 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 14.

ROM Map 7 could be used as the template for an Active Transmit (Drop) and/or Active Receive

(Insert) Map with a modulator and/or demodulator configured for 1920 Kbps operation. This

would be used with E1 frames where time slot 16 is not used for the multiframe alignment signal

and therefore channels 1 through 30 are mapped directly with time slots 1 through 30.

ROM Map 7 could also be used as the template for an Active Transmit (Drop) and/or Active

Receive (Insert) Map with a modulator and/or demodulator configured for 1024 Kbps operation.

This would be used with T1 or E1 frames where channels 1 through 16 are mapped into time

slots 1 through 16 (in any order). Map slots 17 through 30 would be ignored.

ROM Map 7 could also be used as the template for an Active Transmit (Drop) and/or Active

Receive (Insert) Map with a modulator and/or demodulator configured for 1536 Kbps operation.

This would be used with T1 frames where channels 1 through 24 are mapped into time slots 1

through 24 (in any order). Map slots 25 through 30 would be ignored.

ROM Map 8 could also be used as the template for an Active Transmit (Drop) and/or Active

Receive (Insert) Map with a modulator and/or demodulator configured for 1920 Kbps operation.

However, this mapping would be relevant with E1 frames where time slot 16 is used for the

multiframe alignment signal and therefore channels 1 through 30 are mapped to time slots 1

through 16 and 17 through 31.

Содержание DMD20 LBST



















































































































































































































































































































Результаты поиска

Содержание DMD20 LBST

Отзывы:

Похожие инструкции для DMD20 LBST

Бренды по названию

Популярные бренды

Radyne DMD20 LBST, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DMD20 LBST

Отзывы:

Похожие инструкции для DMD20 LBST

Бренды по названию

Популярные бренды