Radyne DMD20 LBST Скачать руководство пользователя страница 146

Страница: 146 / 306

DMD20/20LBST Universal Satellite Modem

User Interfaces

MN-DMD20-20LBST Revision 14

4–38

TCP/IP (menu)

BOOT MODE

{DEFAULT, NON-VOL, BOOTP, IP TEST}

DEFAULT:

During initialization (boot up), the modem will restore the web setting

to the standard IP Mask and addresses supplied by the modem. The modem will

be taken off the network and will not be accessible. The Default settings are:

IP Address Mask:

255.000.000.000

(FF.00.00.00 hex)

Modem IP Address:

010.000.000.001

(C0.A8.00.EE hex)

Server IP Address:

010.001.001.001

(0A.01.01.01 hex)

Router IP Address:

010.000.001.001

(0A.00.01.01 hex)

BOOTP:

During initialization (boot up), the modem will get the

names, masks, and IP Addresses of the modem, router,

and server.

NON-VOL:

Stores and uses IP Mask and addresses as provided by

the user.

IP TEST:

Stores and uses IP Mask and addresses to fixed settings as listed

below.

Bootp Server Tag:

206

IP Address Mask:

255.255.255.000

(FF.FF.FF.00 hex)

Modem IP Address:

192.168.0.238

(C0.A8.00.EE)

Server IP Address:

192.168.000.101

(C0.A8.00.65)

Router IP Address:

192.168.000.102

(C0.A8.00.66)

BOOTp SERVER

{128 – 257, default is 206}

Only used if Bootp is selected in Boot Mode. Should be

consistent with the tag expected by the users Bootp Server.

MODEM HOST

The Host Modem for the network.

IP ADDR MASK

{XXX.XXX.XXX.XXX} Hexidecimal Mask

{ddd.ddd.ddd.ddd} Decimal Mask

The IP Address Mask of the local network. The mask is

expressed in a hexadecimal format, and must be a valid TCP/IP

Mask. This field should be set before changes are made to the

Modem or Router Address.

MODEM IP ADDR

{XXX.XXX.XXX.XXX} Hexidecimal Address

{ddd.ddd.ddd.ddd} Decimal Mask

The IP Address of the modem. This address should be

consistent for the mask defined. This address is expressed in

hexadecimal format. Broadcast and loop back addresses will not

be allowed. These are addresses with all subnet bits set to 0’s

or 1’s.

Содержание DMD20 LBST



















































































































































































































































































































Результаты поиска

Содержание DMD20 LBST

Отзывы:

Похожие инструкции для DMD20 LBST

Бренды по названию

Популярные бренды

Radyne DMD20 LBST, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DMD20 LBST

Отзывы:

Похожие инструкции для DMD20 LBST

Бренды по названию

Популярные бренды