25
no
Regular tare mode. Select this parameter to make the scale overwrite the set
(selected) tare value with the most recently entered one.
tArF
Select this parameter to make the scale store the latest tare value in memory. The
latest tare value is displayed after scale restart.
AtAr
Select this parameter to run autotare mode.
EAcH
Select this parameter to make the scale automatically tare each accepted
measurement.
Press
key to confirm, next go to the home screen.
12.6. Tare Entering Mode
The tare is entered using
+
key combination, to enter tare press the
keys when the home screen is displayed. There are two enter modes.
Procedure:
Enter
<P2.rEAd / 2.6.ttr>
submenu.
Press
key, parameter values are displayed successively one by one:
tArEH
Select to enter tare value manually by means of
+
key combination.
tArnn
Select to enter tare value that is stored in scale memory, use
+
key
combination.
Press
key to confirm, next go to the home screen.
12.7. Tare Value Memory
It is possible to store 10 tare values in scale memory.
12.7.1. Entering Tare Value to Scale Memory
Enter
<P2.rEAd / 2.7.tArn>
submenu, name of tare no. 1 from tare
database is displayed (
<tArE 0>
), to select a different record press
key.
