RADWAG APP series, Инструкция по эксплуатации

Страница: 9 / 69

- 9 -
* Please take special safety measures when weighing magnetic loads, as part
of this balance is a strong magnet. If there is a necessity to perform
measurement of such load, please use option of under hook weighing, which
removes the load from area influenced by the magnet. For installation place
of under hook device, please look at the bottom casing of the balance,.
*
Avoid static charging of items to be weighed, or weighing container. In case
of static discharges may occur, please ground the device. Grounding bolt is
placed at the back side of the balance’s casing.
4.2. Unpacking
Cut safety tape off. Take balance off the box. Take out balance from
package. Take all necessary to correct performance of balance elements
off the box.
Take off the pan and remove carrying protection, look at drawing below.
Placing balance in place of using.
4.3. Positioning
Before switching on the balance, please level the device with
two adjusting feet situated at the back of the casing. Please
level the balance so that the air bubble of the level is placed
centrally.