RADWAG APP series, Инструкция по эксплуатации

Страница: 7 / 69

- 7 -
2. BASIC INFORMATION
2.1. Intended use
Balance you have acquired serves to determine the weighing value of a load in
laboratory environment. It is intended for application as a non-automatic weighing
instrument only, i.e. the material to be weighed is manually and carefully placed in
the center of the weighing pan. Weighing result should be read only after stable
reading has been obtained.
2.2. Inappropriate use
Do not use the balance as a dynamic weighing instrument. Even if small quantities
of weighed material are added or removed from the weighing pan of the instrument,
the reading should be taken only after stabilization of the result. Do not place any
magnetic materials on the weighing pan, as this can cause damage of the
measuring system of the instrument. Be sure to avoid impact shock and overloading
the balance in excess of the prescribed maximum load rating, minus any possible
tare weight that has been applied. Never use the balance in an environment
endangered by an explosion. This balance has not been adjusted for operation in
explosive areas. There must not be any modification made to the balance.
2.3. Warranty
Warranty is not valid at the following:
•
Non-observation of the guidelines in the user manual,
•
Use of balance other than specified in this manual,
•
Alternation to or opening of the device,
•
Mechanical damage and damage caused by media, natural water,
and tear,
•
Inappropriate erection or electric installation,
•
Overloading of the measuring instrument.