RADVision Scopia XT5000 Series, Руководство по установке

Страница: 61 / 184

Chapter 6 | Initial Configuration
After connecting the system and powering it on as described in Setting up the Scopia XT Series on page 35, perform
the initial configuration as described in these sections:
Navigation
•
How to Control the XT Series on page 61
•
Registering and Enabling your Scopia XT Series license on page 75
•
Performing Basic Configuration on page 82
•
Setting Basic System Information on page 90
•
Configuring Video Connections on page 99
•
Configuring Audio Connections on page 109
•
Configuring Network Settings on page 117
How to Control the XT Series
You can set up and control your XT Series, as well as make calls, in the following ways:
• From the endpoint's main menu, using your XT Remote Control Unit (see
Using the XT Remote
Control Unit on page 68 and Accessing the Scopia XT Series Main Menu on page 67).
• From the XT Series's web interface (see
Accessing XT Series Web Interface on page 62).
Before performing initial configuration, we recommend reading the following topics to familiarize yourself
with how to control the XT Series:
Navigation
•
Managing your XT Series from the Web Interface on page 61
•
Managing your XT Series Locally from the Endpoint on page 66
Managing your XT Series from the Web Interface
You can configure and control the XT Series remotely using the web interface:
• Perform administrative tasks, such as:
–
Monitoring the status
–
Backing up the endpoint's configuration files
• Place a call (for details, see
User Guide for Scopia XT Series )
• Change basic settings, such as the interface language (for details, see
Performing Basic
Configuration on page 82)
You can also configure the XT Series from the endpoint itself by first enabling advanced configuration,
as described in
Maintaining the Scopia XT Series Locally from the Endpoint on page 73.
Installation Guide for Scopia XT5000 Series Version 3.2 Initial Configuration | 61