•
For computers and laptops with a DVI out connector, connect the DVI cable to the DVI-I
socket of the XT Codec Unit and connect the other end of the cable to the computer.
Figure 3-16
Connecting a computer to Scopia XT Series
•
For computers with a VGA output connector, use the included DVI to VGA adapter.
a.
Connect the DVI-VGA adapter to the DVI-IN socket of the XT Codec Unit.
b.
Connect a VGA cable to the adapter. This cable is not supplied with the system.
c.
Connect the VGA cable to the PC/Laptop VGA out socket.
Step 2
Connect the computer audio to the XT Codec Unit.
When you share content from the PC during a call, remote participants hear the computer's
audio output.
If you are using the one-way Microphone Pod, you can connect both the microphone and the
PC output to the codec via an audio mixer. For details, see Scopia XT Series Installation
Guide.
Note
The audio input port supports both analog and digital optical audio.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Making Point-to-Point Video Calls | 47
