Figure 2-4
Setting the XT Remote Control Unit Code
Step 2
Enter the numeric code in the Remote control code field. You can choose any value between
1-99.
Step 3
From the web interface only, select Save.
Step 4
On the XT Remote Control Unit, press the * and # keys simultaneously.
The red led blinks twice.
Figure 2-5
Setting the code on the XT Remote Control Unit
Step 5
Using the keypad, type the number you just entered in the Remote control code field.
Note
You must always use two digits for a code. For example, to set the code to “1”,
enter “01”.
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Getting Started | 16
