7
M16MI325 A03_06/18
Choices programmes
Schematic sequence of programmes:
Auto
Comfort
Eco
P1
P2
P3
The device is delivered by default with the self-learning mode enabled
as described
on page 6
. If this programme suits your requirements, you
have nothing more to do, the device, after the initial 7 day learning
period will follow the autoprogramme which will continue to tailor
itself to your occupancy cycles.
Programmes overview
- Auto:
Auto-programming (See Automatic programming with selflear-
ning process
page 6
).
- Comfort:
your device will operate in Comfort mode, 24 hours a day, as
regards each day selected.
Note:
You can set the Comfort mode temperature to the temperature
you require
(see the Setting the Comfort mode temperature section
page 5)
.
- Eco:
The device will operate 24 hours a day in Eco mode.
Note:
You can set the Eco mode temperature to the temperature you
require
(see the Setting the Eco mode temperature section page 5)
.
- P1:
your device will operate in Comfort mode from 06:00 to 22:00 (and
in Eco mode from 22:00 to 06:00).
- P2:
your device will operate in Comfort mode from 06:00 to 07:30 and
from 22:00 to 23:30 (and in Eco mode from 07:30 to 22:00 and from
23:30 to 06:00).
- P3:
your device will operate in Comfort mode from 06:00 to 07:30,
from 18:00 to 19:30 and from 22:00 to 23:30 (and in Eco mode from
23:30 to 06:00, from 07:30 to 18:00 and from 19:30 to 22:00).
1-
If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press
for 5
seconds.
When the cursor moves above the setting time symbol , press
shortly.
1
6-
Press
to exit the programming Mode and return to Auto Mode.
Note:
without action on the keys, it will return to Auto after a few mi-
nutes.
3-
With
or
, select P1.
P1 will flash. Press
for 5 seconds to make changes.
1
5 sec.
2
1
Save by pressing
.
4-
The P1 start time (which by default is 06:00) will flash.
Using
or
, you can change this time, by increments of 30
minutes.
2
1
2-
Press
or
. The cursor moves above
prog
.
1
Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not
suit your routines, you can change them.
Modifying the P1, P2 or P3 programmes.
If you modify the time schedules for the P1, P2 or P3 programmes,
the schedules will be modified for all the days of the week for which P1,
P2 or P3 had been set.
5-
The P1 end time (which by default is 22:00) will flash. Using
or
, you can change this time, by increments of 30 minutes.
Save by pressing
.
2
1
5-
To change and/or allocate programmes press
. To exit the set-
ting the time and day mode, press
3 times.
4-
The cursor above the number 1 (which represents the Monday) will
flash. Select the date using
or
.
Save by pressing
.
1
1
2
EN
