RADLEY 1325-500 Скачать руководство пользователя страница 8

Страница: 8 / 17

WARNING: Some of the following symbols may appear on your tool. Study these symbols and learn their

meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool.

WARNING: Please read all the safety and operating instructions carefully before using this

tool. Please pay particular attention to all sections of this User Guide that carry warning

symbols and notices. Some of the following symbols may be used on this tool.

Observe caution and safety notes.

To reduce the risk of injury, user must read and understand User Guide before using this

tool.

Wear ear protection.

Wear protective helmet and eye protection.

Switch off and remove plug from power source before cleaning or maintenance.

Do not use in the rain or leave outdoors while it is raining.

Keep bystanders away.

Don’t touch the inlet and outlet when the vacuum cover is opened, or the tube is removed.

Double insulation.

Remove plug from the power source immediately if the power cord is damaged or cut.

This symbol designates that this tool is listed with Canadian and U.S.

requirements by UL

UL 987

，

Stationary and Fixed Electric Tools

CSA C22 . 2 No . 71.2-10 Electric Bench Tools

Содержание 1325-500


















Результаты поиска

Содержание 1325-500

Отзывы:

Похожие инструкции для 1325-500

Бренды по названию

Популярные бренды

RADLEY 1325-500, Руководство пользователя

Результаты поиска

Содержание 1325-500

Отзывы:

Похожие инструкции для 1325-500

Бренды по названию

Популярные бренды