RADLEY 1325-500, Руководство пользователя

Страница: 12 / 17

11
WARNING: To prevent serious injury from accidental operation Turn the Power switch of the tool to its “OFF” position
and
unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Cleaning
Clean out dust and debris from vents and electrical contacts by blowing with compressed air. Keep tool handles
clean, dry
and free of oil or grease.
Certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents , ammonia and household detergents
containing
ammonia. Never use flammable or combustible solvents around tools.
WARNING: Tool service must be performed only by qualified repair personnel. Service or maintenance performed
by
unqualified personnel could result in a risk of injury. If the tool does not work properly, return the tool to a service
facility for
repairs.
Lubrication
All of the bearings in this tool are lubricat- ed with a sufficient amount of high grade lubricant for the life of the unit
under
normal operating conditions . Therefore, no further lubrication is required.
TROUBLESHOOTING
Problem
Possible
Causes
Likely Solutions
Machine
switched on
but will not
run
There is a
break in the
power supply
to the machine
The switch
may be
damaged
Check power at outlet
Check that cord is plugged in
The electric
motor
becomes hot
The motor has
become
overloaded
The motor is
defective
Give the motor a chance to cool down
Contact Customer Service @ 1-866-349-8665
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before serv i ce .