RADLEY 1281-914, Руководство пользователя

Страница: 8 / 20

7
Rotary Tool Kit - Owner's Manual
SPECIFIC SAFETY RULES
WARNING: Know your rotary tool. Do not plug the tool into the power
source until you have read and understand this Instruction Manual. Learn
the tool’s applications and limitations, as well as the specific potential
hazards related to this tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
Always wear eye protection. Any power tool can
throw foreign objects into your eyes and cause
permanent eye damage. ALWAYS wear safety
goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday
glasses have only impact resistant lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in compliance with ANSI Z87.1 could cause
serious injury when they break.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own cord.
Contact with a “live”
wire will make exposed metal parts of the tool “live” and shock the operator.
Always make sure the work surface is free from nails and other foreign objects.
Cutting into a nail can cause the bit and the tool to jump and damage the bit.
Never hold the workpiece in one hand and the tool in the other hand when in
use. Never place the hands near or below the cutting surface. Clamping the
material and guiding the tool with both hands is much safer.
Never lay workpiece on hard surfaces like concrete, stone, etc.
Protruding
cutting bit may cause the tool to jump.
Always wear safety goggles and dust mask. Use only in well-ventilated area.
Using personal safety devices and working in a safe environment reduces risk of injury.
After changing the bits and accessories or making adjustments, make sure the
collet nut and any other adjustment devices are securely tightened.
Loose
adjustment devices will be violently thrown.
Always use the correct collet size. If the collet size is larger than the accessory
shank size it will not grip the shank properly, leading to possible injury to the
operator or damage to the tool.
Always check accessory bits, grinding stones, cut-off wheels etc. for damage
before each use. Damaged accessories can break during use and cause serious injury.
Never use dull or damaged bits. Sharp bits must be handled with care.
Damaged bits can snap during use. Dull bits require more force to push the
tool, possibly causing the bit to break.
WEAR CSA
APPROVED
EYE PROTECTION