background image

15

6 Amp Reciprocating Saw - Owner's Manual

MAINTENANCE

GENERAL

WARNING: When servicing, use only 

identical replacement parts. The use of 

any other part may create a hazard or 

cause product damage.

DO NOT use solvents when cleaning 

plastic parts. Plastics are susceptible to 

damage from various types of commercial 

solvents and may be damaged by their 

use. Use a clean cloth to remove dirt, dust, 

oil, grease etc.

WARNING: Do not allow brake fluids, 

gasoline, petroleum-based products, 

penetrating oils, etc. to come into contact 

with plastic parts. They contain chemicals 

that can damage, weaken or destroy 

plastic.

DO NOT abuse power tools. Abusive 

practices can damage the tool and the 

workpiece.

WARNING: DO NOT attempt to modify 

tools or create accessories. Any such 

alteration or modification is misuse and 

could result in a hazardous condition leading 

to possible serious injury. It will also void the 

warranty.

It has been found that electric tools are 

subjected to accelerated wear and possible 

premature failure when they are used on 

fiberglass boats and sports cars, wallboard, 

spackling compounds or plaster. The chips 

and grindings from these materials are 

highly abrasive to electric tool parts such 

as bearings, brushes, commutators, etc.  

Consequently, it is not recommended that 

this tool be used for extended work on any 

fiberglass material, wallboard, spackling 

compounds or plaster. During any use on 

these materials it is extremely important that 

the tool is cleaned frequently by blowing it 

out with an air jet.

WARNING: Always wear safety goggles or 

safety glasses with side shields during all 

cutting operations. It is critical that you also 

wear safety goggles or safety glasses with 

side shields and a dust mask while blowing 

dust out of the reciprocating saw with an air 

jet. Failure to take these safety precautions 

could result in permanent eye or lung 

damage.

LUBRICATION

All of the bearings in this tool are lubricated 

with a sufficient amount of high-grade 

lubricant for the life of the unit under normal 

conditions. Therefore, no further lubrication 

is required.

Содержание 1270-080





















Отзывы: