REMOVING A BIT FROM THE BIT STORAGE CARTRIDGE
1. Rotate the cartridge knob (1) until the desired bit is visible in the cartridge
window (2) Fig. 2.
2 1
Fig. 2
Fig. 3
2. Pull outward on the cartridge knob until the bits are fully exposed (Fig. 3).
3. Remove the desired bit and return the cartridge to its original position within
the screwdriver.
INSTALLING A SCREWDRIVER BIT
WARNING
screwdriver bits. Accidentally touching the switch may start the tool and possibly
cause an injury.
1. Insert the screwdriver bit (1) into the collet (2) until the bit is securely held in the
collet by the magnetized collet (Fig. 4).
1 2
Fig. 4
7
