8
1239-222
Before starting the operation, jog the drill switch to make sure the drill bit
does not wobble or vibrate.
apart or become unbalanced during use.
Make sure the spindle has come to a complete stop before touching the chuck
or attempting to change the drill bit.
chuck before starting drill.
BATTERY & CHARGER SAFETY
WARNING: Only use the charger supplied with this kit to charge the 20V
Max* Li-ion batteries for this tool. Charging any other batteries may damage
the charger and possibly cause serious injury.
Do not store or carry the battery in a manner in which metal objects could
contact the exposed metal end. Do not place the battery in aprons, pockets,
drawers, etc. with loose nails, screws, keys etc. The battery could short circuit
Never attempt to open the battery for any reason. If the housing of the battery
breaks or cracks, immediately discontinue use and do not recharge.
Do not charge the battery if it is wet or shows any evidence of corrosion.
A small leakage from the battery may occur under extreme usage, charging or
temperature conditions. This does not indicate a failure. However, if the outer
seal is broken and this leakage gets on your skin, follow these steps:
1. Wash immediately with soap and water.
2. Neutralize with a mild acid such as lemon juice or vinegar.
minimum of 10 minutes and seek medical attention.
NOTE:
The battery liquid is slightly acidic.
Do not use an extension cord. Plug the charger cord directly into an electrical outlet.
