RADLEY 1239-221, Руководство пользователя

Страница: 15 / 24

14
1239-221
ASSEMBLY AND OPERATING
(continued)
FORWARD / REVERSE SWITCH
The forward/reverse switch (1) is conveniently mounted above the trigger switch (2)
(Fig. 6). To make the drill rotate clockwise (for drilling) push the forward/reverse switch
to the left. To make the drill rotate counterclockwise for removing screws, push the
forward/reverse switch to the right.
NOTES:
a) Never change the position of the forward/reverse switch while the chuck is turning.
b) The trigger switch will NOT function with the forward/reverse switch in the middle position.
This drill is equipped with a variable-speed ON/OFF trigger switch.
1. To start drill, gently squeeze the trigger switch (2) (Fig. 7).
NOTE:
The drill will turn at its slowest speed when the trigger switch is depressed
slightly. The drill will turn at its fastest speed when the trigger switch is fully depressed.
2. To stop the drill, release the trigger switch.
NOTE:
Drilling at a slow speed for an extended period of time may cause the drill motor
or the battery pack to overheat. If either the drill or the battery gets hot, stop drilling and
allow them to cool for at least 15 minutes.
LED WORKLIGHT
The LED worklight (3) will automatically turn ON when the trigger switch is squeezed
(Fig. 8). It will automatically turn OFF when the trigger switch is released.