7
SPECIFIC SAFETY RULES
WARNING:
Know your cordless drill. Do not plug in the charger or install
the battery in the tool until you have read and understand this Owner's
potential hazards related to this tool. Following this rule will reduce the risk
Always wear eye protection. Any power tool can
throw foreign objects into your eyes and cause
permanent eye damage. ALWAYS wear safety
goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday
glasses have only impact resistant lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
WARNING:
Always use a safety shield, hearing protection and dust mask
when drilling concrete.
WARNING:
acetone, lacquer thinner or similar highly volatile solvents to clean the tool.
WARNING:
Use only accessories that are recommended for this cordless
drill. Follow the instructions that accompany the accessories. The use of
improper accessories may result in injury to the operator or damage to the tool.
WARNING:
If any part is missing or damaged, do not plug the tool into the
power source or install any accessory until the missing or damaged part is
replaced.
Do not drill material too small to be securely held. Always keep hands out of
the path of the drill bit. Avoid awkward hand positions where a sudden slip
could cause your hand to move into the path of the drill bit.
Secure the workpiece. Use clamps or a vice to hold the workpiece. It is safer
than using your hand and it frees both hands to operate the tool.
Make sure there are no nails or foreign objects in the part of the workpiece to
be drilled.
To avoid injury from accidental starting, always remove the battery from the
tool before installing or removing a drill bit.
WEAR CSA
APPROVED
EYE PROTECTION
Содержание 1239-221
Страница 21: ...20 1239 221 PARTS EXPLODED DIAGRAM ...