RADLEY 1150-000, Руководство пользователя, Страница: 7 / 22

1150-000
INVERTER STICK WELDER KIT
6
GUARDS & COVERS.
Guards and covers reduce accidental contact with moving parts or
flying debris. Make sure they are properly installed, undamaged, and working correctly
before operating machine.
FORCING MACHINERY.
Do not force machine. It will do the job safer and better at the
rate for which it was designed.
NEVER STAND ON MACHINE. Serious injury may occur if machine is tipped or if the
cutting tool is unintentionally contacted.
STABLE MACHINE. Unexpected movement during operation greatly increases risk of
injury or loss of control. Before starting, verify machine is stable and mobile base (if
used) is locked.
USE RECOMMENDED ACCESSORIES.
Consult this owner’s manual or the manufacturer
for recommended accessories. Using improper accessories will increase the risk of
serious injury.
UNATTENDED OPERATION.
To reduce the risk of accidental injury, turn machine OFF
and ensure all moving parts completely stop before walking away. Never leave machine
running while unattended.
MAINTAIN WITH CARE. Follow all maintenance instructions and lubrication schedules
to keep machine in good working condition. A machine that is improperly maintained
could malfunction, leading to serious personal injury or death.
DAMAGED PARTS. Regularly inspect machine for damaged, loose, or misaligned parts
- or any condition that could affect safe operation. Immediately repair/replace before
operating machine. For your own safety, DO NOT operate machine with damaged parts!
MAINTAIN POWER CORDS.
When disconnecting cord-connected machines from
power, grab and pull the plug—NOT the cord. Pulling the cord may damage the wires
inside. Do not handle cord/plug with wet hands. Avoid cord damage by keeping it away
from heated surfaces, high traffic areas, harsh chemicals, and wet/damp locations.
SERVICE
•
Have your machinery serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the machinery is maintained.