RADLEY 1150-000 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 22

RADLEY 1150-000 Скачать руководство пользователя страница 10

9

SAFETY SYMBOLS

WARNING:

Please read all of the safety and operating instructions carefully

before using this tool. Please pay particular attention to all sections of this

User Guide that carry warning symbols and notices. Some of the following

symbols may be used on this tool.

Observe caution and safety notes.

To reduce the risk of injury, user must read and understand User Guide before

using this tool.

Wear ear protection.

Wear protective helmet and eye protection.

Switch off and remove plug from power source before cleaning or

maintenance.

Do not use in the rain or leave outdoors while it is raining.

Keep bystanders away.

Don’t touch the inlet and outlet when the vacuum cover is opened or

the tube is removed.

Double insulation.

Remove plug from the power source immediately if the power cord is

damaged or cut.

This symbol designates that this tool is listed with Canadian and U.S.

requirements by CSA Group

Conforms to CAN/CSA C22.2 No. 0; CAN/CSA C22.2 No. 0.4;

CSA-C22.2 No. 60-M1990; UL551 (8th Edition)

229683

EXTREME 80

«
...
8
9
10
11
12
...
»

Содержание 1150-000























Отзывы:

Нет отзывов