RADIXON WR-G35DDC EXCALIBUR ULTRA, Руководство пользователя

Страница: 28 / 128

WiNRADiO G35DDC HF Receiver
28
Multiple Receiver Operation
With the WiNRADiO Excalibur Ultra you can tune to three stations at once,
listening to one (or all of them mixed together) and recording the others.
The only condition is that these stations frequencies all fit inside the DDC
bandwidth. The DDC bandwidth is selectable using the
DDC BW control
above the DDC spectrum.
You can select one of the three receivers by clicking on the associated tab
above the main frequency display:
The same tuning procedure applies for all three receivers. For example you
can type the frequency directly into the keyboard, use the tuning knob, etc. If
the new frequency is such that the existing DDC bandwidth cannot
accommodate this new frequency as well as keep the other receivers tuned to
their existing frequencies, the software will “dump” (disable) one or both of the
other two receivers, giving priority to the currently selected one, except if one
of the other receivers is currently recording or its frequency is “locked” by the
user. In such case, the new frequency will not be accepted and the recording
or lock indicators inside the other receivers’ tabs will flash to indicate this
situation. You will either need to manually stop the recording or unlock the
locked receivers.
The receivers can be locked using the Lock button located above the
demodulator spectrum. Each receiver can be locked separately.
If a receiver is locked, a “lock” symbol will appear in its associated tab:
If you are currently recording the DDC spectrum using the DDC recorder, this
will make it impossible to tune any of the three receivers to any frequency
outside of the currently recorded DDC spectrum.