Page 34
Version 1.0
9.3.3
Programme Data Transfer
This menu item is included to support specialist retailers. In this way a desired preset can be trans-
ferred from a master device to several slave devices. This pre-setting serves the common interests of a
group of customers, for example regional or ethnic interests.
Master and slave receivers are linked together using as RS 232 interface.
NOTE:
All receiver functions are locked while the receiver is in data transfer mode. The transfer of data can
only be interrupted by removing the mains cable.
9.3.4
Reinstallation
If you changed or deleted the preset data, you can reset the receiver to the factory settings. To do this
you will need the password (Section 9.4).
9.3.5
Transponder Editor
You can change, add or delete all satellite data. This function is intended only for servicing purposes
and has no effect whatsoever on the operation of your receiver.
NOTE:
If you delete all of the data for a satellite, the satellite itself is also deleted.
9.3.6
Delete all Channels
CAUTION:
When you carry out this function (password needed) all settings are deleted and you will need to
reprogram your receiver!
If you want to replace the entire program information, delete all programs. Your receiver now displays
the “Welcome” menu as described in Section 6.
9.4
Access Manager
Several functions on your receiver can only be
accessed using a password – the factory default is
0 0 0 0
.
In order to prevent unauthorised access to your
receiver, you can protect it with an access lock.
• Under menu item 4, enter the password and
activate the access control.
When you do this, you will need to enter the pass-
word each time you turn the receiver on.
In order to prevent the viewing of certain
programmes, you can activate an programme lock under point 1 which is similar to the access lock.
Once this lock has been set, you will need to enter your password each time you change programme in
order to remove the lock.
If necessary you can change the password using menu item 3.
Access Manager
TV
Exit
Menu
Back
Main menu
Go Back
Choose the setting you wish to change
with [UP/DN] and select with [OK].
1. Lock Programme
2. Access Lock
3. Change Password
Entire List
OFF
Programming Your Receiver
