radiotec rapidcount M 120, Инструкция по эксплуатации

Страница: 26 / 32

Option Explanation Available possibilities
1. Printer Settings
Baud Rate:
Transmission speed between the machine and the printer 2400 bps to
115200 bps
Paper size:
The printer can be adapted to the paper width
2 INCH, 3 INCH
Font:
Set up the font size in inches
9 x 13, 12 x 24
Blank of tail:
Empty lines that will be left at the end of the receipt
3 to 9 lines, 5 lines
Print number:
Amount of receipts that will be printed each time
1 to 3 pieces
Paper cutting:
Automatic paper cutting (depending on the printer)
Yes , No
Print ID:
Printing of the User ID on the receipt
Yes , No
Select ID:
Setting a User ID: move through characters from right to left with LEVEL/CF and
change the character with SET and ADD.
Auto Print:
Automatic printing when the banknotes are removed from stacker
Yes, No
2. LCD Language Not selectable English
3. SP Select
In SP Mode, when a differing banknote is found:
Continue: The machine maintains the original reference denomination.
Refresh: The machine uses the new banknote as reference from then on.
Cotinue, Refresh
4. Warning Buzz If activated, the machine beeps when an error is encountered or a batch is full. Off , On
5. CF Lock
Locked: During Euro or GBP mode the CF key is disabled, so the counterfeit
detection cannot be modified or deactivated.
Unlocked: Allows selection of desired counterfeit tests.
Lock , Unlock
6. Comma If enabled, a comma is placed after the thousands digit. Enable , Disable
7. Stacker brake
If activated, when an error occurs the stacker stops before the banknote is
ejected.
On, Off
8. Auto start
If deactivated, the START/RESET key has to be pressed to start the counting
procedure.
On , Off
9. Power Save The display will turn off after the specified time in minutes. 1 to 60 min, 20 min
10. Manual Add
If this option is activated, when in value counting mode the user can manually
increase or decrease the amounts of each denomination. By pressing and
holding the SAVE/PRINT key the user enters the Counting Info menu. The user
can navigate between the denominations with the BATCH and MODE keys and
increase or decrease the amount of each denomination with the ADD and SET
keys. START/RESET closes the menu.
Note: Use this option when you have dirty or severly damaged
banknotes, which the machine does not seem to be able to count.
On, Off
11. Default Load Resets the machine to the original factory configuration.
12. Batch function Further options for the Batch counting mode are disabled.
13. Old GBP
Currency
Available only when in GBP mode.
Reject: Old version of £20 banknote is rejected.
Count: All versions are counted.
Reject, Count
!