[1. Save Add > Memory]:
The total value and total amount will remain available after turning off the machine, so you can add more
counting results to the total sum.
Note: This option is useful when you have to stop the counting and turn off the machine.
When you switch it on again you can continue from the same spot.
[2. Save Add > G. Total]:
Build a grand total sum out of several partial total sums. The current partial total sum will be added to a
grand total sum. After selecting it, the grand total sum will be shown. Then you can continue counting for
the next partial total sum.
[3. Clear Add]:
The total sum will be immediately deleted, so you can start a new total sum.
[4. Clear G. Total]:
The grand total will be deleted. The current counting result, which has not been added to the grand total
yet, will remain available after deleting the grand total. You can add more counting results to the total
sum.
Note: When Grand Total is activated, you can switch the view on the display between
the grand total and the partial total “Add Total” by pressing the START/RESET key.
Both functions Add and Grand Total will remain active until you turn to Normal mode in the Addition
menu.
!
!
Settings
Press and hold the MODE key to enter the Settings menu:
Use the key…
to…
MODE and BATCH
navigate through the menu
SET
select or modify an option
START/RESET
exit the Menu
LEVEL/CF and CURR
change the page
The options by default are marked
bold
in the following table:
Содержание rapidcount M 120
Страница 30: ......
