RadioPopper RadioPopper PX Radio Wireless Скачать руководство пользователя страница 2

Страница: 2 / 29

Page 2

RadioPopper is owned by Leap Devices, LLC in Vancouver, WA. This

product was designed, produced, and manufactured in the USA.

Leap Devices LLC, 501 SE Columbia Shores Blvd Suite 100, Vancouver, WA 98661

FCC ID: V4TRPPXTX506

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

* Consult the dealer or an experienced radio/TV technician for help.

This equipment has been verified to comply with the limits for a class B computing device,

pursuant to FCC Rules. Operation with non-approved equipment is likely to result in inter-

ference to radio and TV reception.

The user is cautioned that changes and modifications made to the equipment without the

approval of manufacturer could void the user’s authority to operate this equipment.

Содержание RadioPopper PX Radio Wireless





























Результаты поиска

Содержание RadioPopper PX Radio Wireless

Отзывы:

Похожие инструкции для RadioPopper PX Radio Wireless

Бренды по названию

Популярные бренды

RadioPopper RadioPopper PX Radio Wireless, Руководство пользователя

Результаты поиска

Содержание RadioPopper PX Radio Wireless

Отзывы:

Похожие инструкции для RadioPopper PX Radio Wireless

Бренды по названию

Популярные бренды