RadioPopper RadioPopper PX Radio Wireless, Руководство пользователя

Страница: 20 / 29

Operating Instructions
Page 20
Operational Features - Con’t.
Reset Defaults - (r E)
Your PX units may be completely reset to factory defaults using this mode. The reset will also invoke the factory
pre-test start sequence the next time your unit is powered on. To invoke the Reset to take place, press and hold the “X”
button. A time out will count backward for 5 seconds to zero. At zero the unit will blank the display, both LED lights
will strobe during the reset. The unit will then power down.
The reset is completely non destructive and may be performed at any time. During the reset, the PX unit will reset
Radio Channel 1, Canon Hardware Mode, Normal Feedback Mode, and will zero the Group Level settings.
The next time the unit is powered on, the factory pre-test will take place. During this test, the current unit firmware
version is displayed in the format, for example, “6 -” , then “01”. This would indicate firmware version 6-01.