1997 Radionics All rights reserved
The Radionics logo is a registered trademark of Radionics,
1800 Abbott Street, Salinas, CA 93901, USA
74-07661-000-B 01/97
D9024/D10024 Operation
Page 13 of 13
D.4.e.3. View Status
Option three on the View Menu displays system status. This is the same display as the
normal Alphanumeric Display without the logo. Exit this menu by pressing the
NO
key.
D.4.e.4. View Outputs
Option four on the View Menu displays information on disabled devices.
Note: Using the
Alarm Silence
Key forces all notification appliances to an OFF condition.
D.4.e.5. View Disablements
Option five on the View Menu displays information on disabled devices.
E. Level Three (Programmer) Functions
Level Three instructions within this Operator’s Manual are for operations that are included in the system
operation but require a Level Three pass code. See the Programmer’s Guide for complete information
on commissioning and programming the Fire Alarm Control Panel.
E.1. Disable/Enable Sounders (Notification Appliances)
All sounders (notification appliances) and relays can be disabled or enabled from the control panel
during testing. Disabling notification appliances requires a Level Three pass code. No code is
required to enable.
From the Main Level of the Operator’s menu, select option five,
5) Disable
. The Disable Menu is
displayed.
Press option five,
5) Outputs
.
The display shows:
1) Sounders 2)Relays
ENABLED ENABLED
Select option
1) Sounders
. The display prompts for the Level Three pass code.
Enter the pass code The panel buzzer sounds, the
System Trouble
LED lights, and the display
message indicates that the output is disabled.
Press the
Trouble Silence
key to silence the buzzer. The
Trouble silenced
LED will light.
Note: The disabled output must be enabled before the system can be reset.
To enable the outputs, press the
NO
key to revert to the main menu.
Enter the Enable Menu by selecting option four,
4) Enable
. Select option five,
5) Outputs
. Select
option one,
1) Sounders
. The system will reset, and the
Trouble Silenced
LEDs will go out.
