1997 Radionics All rights reserved
The Radionics logo is a registered trademark of Radionics,
1800 Abbott Street, Salinas, CA 93901, USA
74-07661-000-B 01/97
D9024/D10024 Operation
Page 12 of 13
D.4.d.3. Print Mode
Option three on the Print Menu allows the operator to toggle between manual and automatic
printing. The current selection is shown on the print menu display.
In Manual Mode, the printer prints only on demand.
In Automatic Mode, the printer automatically prints events as they occur.
D.4.d.4. Print Direction
Option four on the Print Menu allows the operator to change print direction on panel-mounted
printers.
D.4.d.5. Print Disabled
Option five on the Print Menu allows the operator to print the location of all disabled devices.
D.4.e. View Functions
Enter the View Menu from the Main Level of the Operator’s Menu by selecting option seven,
7)
View
. This menu displays information about the selected option on the Alphanumeric Display.
After viewing an option, press the
NO
key to return to the View Menu. Press the
NO
key again to
return to the Main Level of the Operator’s Menu.
D.4.e.1. View Devices
Option one on the View Menu allows the operator to view the current state and text of any
one device on a circuit.
Select option one,
1) Devices
, from the View Menu. The display prompts for the loop
(circuit) number.
Key in the circuit number and press
ENTER
. The display prompts for the address.
Key in the address and press
ENTER
.
D10024
SHIFT
G
T
6
VIEW : 1) Devices 2) Event log
3) Status 4) Outputs 5)Disablements
O
A
N
0
B
C
P
1
2
D
Q
E
R
3
4
F
S
5
H
U
7
V
I
J
W
8
9
K
X
L
Y
M
Z
CHANGE
Figure 7: View Menu
D.4.e.2. View Event Log
Option two on the View Menu allows the operator to view the Event Log.
Select option two, 2) Event log, from the View Menu and press
ENTER
. The display
prompts a beginning entry number. The default is the latest entry. Press
YES
to accept.
Press
NO
to select another entry.
Use the >/< keys to scroll through the log.
Exit this menu by pressing the
NO
key.
