RadioLink SUI04, Руководство пользователя

Страница: 5 / 16

RADIOLINK ELETRONIC LIMITED
www.radiolink.com
- 5 -
Parameters Setting Steps on MP:
1) Choose CONFIG/TUNING on the top of the interface
2) Click
“
Full Parameter Tree
”
3) Click the
“
AVOID
”
, the parameters of
“
AVOID_ENABLE
”
and
“
AVOID_MARGIN
”
are shown
4) Set the value of the AVOID_ENABLE 2(use proximity sensor) means make avoidance sensor enable
5) Set the value of AVOID_MARGIN 3(3 meters, the effective value is from 1 to 10) means vehicle will
attempt to stay at least in 1 to 10 meters from objects while in GPS modes.
6) Click
“
Write Params
”
on the right to save the parameters when the setting is complete.
3.3 H
ow to Enable/Disable the avoidance function by transmitter(Optional)
This setup depends on users ’ habit and is optional.
The avoidance function of flight controller is always automatically enabled a LoiterMode by default anddisabled
ifchange to Stabilize Mode.
If users prefer enabling/disabling the avoidance function by transmitter, setup in the Mission Planner as
Below steps is necessary.
Flight Controller Setting steps (CH7_OPT Parameters) :
1) Choose CONFIG/TUNING on the top of the interface
2) click
“ Full Parameter List ” on the left
3) Input “ CH7_OPT ” (choose the CH7 to make the avoidance function enable or disable) in search column at