RadioLink SUI04, Руководство пользователя

Страница: 15 / 16

RADIOLINK ELETRONIC LIMITED
www.radiolink.com
- 15 -
2.2 Setting steps:
1) Choose CONFIG/TUNING on the top of the interface
2) Click
“ Full Parameter List ” on the left
3) Input “ RNGFND_MAX_CM ” and “ RNGFND_MIN_CM ” in search column at the lower right corner and
press “ Enter ”
4) As the searched the two items shown in the MP, change RNGFND_MAX_CM value to 450cm and
RNGFND_MIN_CM value to 43 cm
5) Click “ Write Params ” on the right to save the parameters when the setting is complete.
RNGFND_MAX_CM is the detectable max distance of flight controller at Alt-Hold Mode
RNGFND_MIN_CM is the detectable min distance of flight controller at Alt-Hold Mode
2.3 How to
Enable/Disable the Alt-Hold
function by
transmitter(Optional)
This setup depends on users
’ habit and is optional.
The Alt-Hold function of SUI04 is always automatically enabled at Alt-Hold Mode and Post-Hold Mode by default
anddisabled ifchange to Stabilize Mode.
If users preferenabling/disabling the Alt-Hold function by transmitter, setup in the Mission Planner is necessary.
Flight Controller Setting steps ( CH8_OPT Parameters) :
1) Choose CONFIG/TUNING on the top of the interface
2) Click
“ Full Parameter List ” on the left
3) Input “ CH8_OPT ” (choose the CH8to make the Alt-Hold function enable or disable) in search column at the
lower right corner and press “ Enter ”
4) As the searched CH8_OPT shown in the MP, change the value to10 (Object Alt-Hold).It means switchon/off
CH7 enable/disable the avoidance function.
5) Click “ Write Params ” on the right to save the parameters when the setting is complete.