RADIOLINK ELETRONIC LIMITED
- 16 -
Transmitter settings
1) Choose a 2-position switch to control CH8
2) Choose INITIAL SETUP on the top of the interface of MP
3) Click
“
FailSafe
”
in the pull-down menu of
“
Madatory Harware
”
on the left and the interface of CH8 PWM
value is shown
4) Toggle the switch. If the PWM value of CH8 is more than 1800, it means the Alt-Hold function is enabled
when the switch is at the bottom position. If the PWM value of CH8 is less than 1800, it means the Alt-Hold
function is disabled when the switch is at the top position.
