29
MXMD:Mix mode
Enter the function menu and use “ Dec(-)” or “Inc(+)” buttonto access PMIX
function, then press “Enter” button toget into PMIX function interface.
1.(Master channel)
Channel selection (MST)
ST, TH, CH3
Initial value: ST
Select setup item"MST" by pressing “Dec(-)” or “Inc(+)”button, press“Enter”
button, the initial master channel will blink.Use“Dec(-)”or“Inc(+)”button toselect
the master channel you wish to adjust, press“Enter” button, the blinking master
channel you selected will stop blinking.
2.(Slave channel)
Channel selection (SLV)
ST, TH, CH3
Initial value:ST
Select setupitem"SLV" by pressing “Dec(-)” or “Inc(+)” button, press “Enter” button,
the initial slave channel will blink. Use “Dec(-)” or “Inc(+)”buttonto select the slave
channel you wish to adjust, press “Enter” button, the blinking slave channel you
selected will stop blinking.
3. (Left, forward or up side mixing amount adjustment)
Mixing amount
-100~0~+100
Select the setting item "LEFT", "FWRD", or "UP"(These setup items are different
depend on the master channel. ST: "LEFT"; TH: "FWRD"; CH3:"UP") by pressing
“Dec(-)” or “Inc(+)” button . press “Enter” key, the initial value of"LEFT","FWRD",
or "UP" will blink, Use “Dec(-)” or “Inc(+)” button to adjust the left,forward,or up
side mixing amount.
(Note:In the interface of adjusting the value,return to the initial value "0" by pressing
