Radiodetection RD8000 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 52

Radiodetection RD8000 Скачать руководство пользователя страница 41

RD8000 Operation Manual 33

105mm

Ø 39mm

173mm

Ø 18mm

82mm

Ø 18mm

168mm, 6

5/8

in

M10 male�

threaded�

studs

Ø 64mm, 2

1/2

in

10.4.7 Types and range of sondes

Standard sonde

The standard sonde combines compact size with
a strong signal and is the standard sonde for most

applications unless a smaller size, greater depth or

rugged construction sonde is required.

Figure 10.9: Standard sonde

Super small sonde

This is a specialized sonde particularly suitable for no-dig
applications. This type of sonde has an interchangeable
battery compartment so that the length of the sonde can
be altered. Shortening the length of the sonde means that
fewer batteries can be accommodated and this will affect
battery life.

Figure 10.10: Super small
sondes

Sewer sonde

This sonde incorporates a very strong housing and makes
the sonde suitable for use in municipal sewer systems.
The sonde has a long life for daily use in all conditions.

Figure 10.11: Sewer sonde

Super sonde

A particularly rugged sonde for use in deep sewers.

FlexiTrace

The FlexiTrace is a traceable plastic covered fiberglass

rod incorporating wire conductors and is used for locating

small diameter, non-metallic pipes to a depth of to 3

meters. The FlexiTrace can be inserted into a pipe or

duct as small as 12 mm/0.5 inch internal diameter with
a minimum bend radius of 250mm. Batteries are not
required, as the FlexiTrace is powered by the RD8000

transmitter.

The FlexiTrace can be used in two modes: Sonde mode
or Line mode. In sonde mode only the tip of the FlexiTrace
is energized whilst in line mode its whole length is
energized.

To use as a sonde, connect both transmitter leads to the

FlexiTrace stud terminals. As the FlexiTrace terminals are
not color coded it does not matter to which terminals the

leads are connected. To use the FlexiTrace in line mode,

connect the red transmitter lead to a FlexiTrace terminal
and ground the black lead.

Figure 10.12: FlexiTrace

«
...
39
40
41
42
43
...
»

Содержание RD8000





















































Отзывы:

Нет отзывов