Radiodetection RD8000, Руководство по эксплуатации, Страница: 24 / 52

16 RD8000 Operation Manual
Section 6. – iLOC™
6.1 About iLOC
iLOC is a standard feature of the RD8000 PXLB and
PDLB. To use iLOC, the transmitter and receiver must be
paired using the procedure in Section 6.2.
iLOC lets you control the transmitter remotely using your
RD8000 receiver. With iLOC you can adjust the output
frequency, power settings and use SideStep. iLOC
commands are sent over a Bluetooth
®
module that can
operate at distances of up to 800 meters in direct line
of sight.
6.2 Pairing iLOC
On the receiver:
Power up the receiver by pressing
the key.
Once the receiver is switched on, press the
key again to enter the menu.
Bluetooth ®
options are located in the BT menu,
you can find it by using the
or arrows to
scroll through the options.
Press the key to enter the BT menu.
Scroll to the PAIR menu using the or arrows
and press the key to enter the PAIR menu.
Scroll to the BT-TX option using the
or
arrows.
The receiver is now ready to pair, follow the
instructions for the transmitter to continue.
On the transmitter:
Power up the transmitter by pressing
the key.
Once the transmitter is switched on, press the
key to enter the menu.
Scroll to the BT menu using the or arrows
and press the key to enter the BT menu.
Scroll to the PAIR option using the or
arrows.
The transmitter is now ready to pair.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
Pairing:
Once both devices are ready to pair press the
key on the transmitter and the key on the
receiver. You must press these keys within a 30
second window, otherwise the connection may
time out.
The transmitter and the receiver will now attempt
to pair.
When pairing is in progress, the transmitter and receiver
will display a flashing
Bluetooth
®
icon. Pairing can take
up to a minute. If the pairing process is successful, the
transmitter will display the icon and the receiver will
display a persistent
Bluetooth
®
icon for the duration of the
connection.
If pairing fails, ensure that any nearby Bluetooth
®
devices
are switched off or invisible then repeat the process.
Once the receiver and transmitter have successfully
paired you can use iLOC™ to change the transmitter’s
output frequency and power levels remotely from
the receiver.
6.3 Changing frequencies
Once the transmitter and the receiver are paired, you can
change the transmitter’s output frequency remotely using
the receiver.
NOTE: in ideal conditions iLOC works at distances
up to 800m in direct line of sight. Operating in built
up areas and in areas with high electromagnetic
interference may reduce iLOC’s performance.
To change frequencies:
Switch on the receiver and transmitter by pressing
the keys on their respective keypads.
Pair the receiver and the transmitter if you have
not already done so.
On the receiver, select the frequency you want
by pressing the key until the frequency is
displayed on screen.
iLOC commands are sent using the key, press
it to send the new frequency to the transmitter.
1.
2.
1.
2.
3.
4.