Radioddity X6100-H1 Protection Bracket Installation Guide
Preparation
Please note you need to prepare a cross screwdriver.
Installation Steps
(1)
Unscrewing the Side Panel:
Using a Phillips head screwdriver, carefully remove the four
screws that are securing the side panel. You can refer to the provided figure for visual
guidance.
Note:
Be sure to store the screws in a safe place for future use.
(2)
Positioning the Gasket:
Next, take the gasket and align it with the four screw holes from
which you just removed the screws. The provided figure can help you ensure correct
placement.
