X6100 Tempered Glass Screen Protector Installation Guide
Preparation
Clean Your X6100 screen: Work in a clean and well-lit area. Clean your hands thoroughly
with warm water and hand soap to remove dirt and grime from your hands. Dry them on a
clean towel before you start installing the tempered glass. Clean your X6100 screen before
application.
(1)
Remove the Protective Layer:
Peel off the protective layer (named Back
①
) from the
adhesive side of the glass. Be sure not to touch the adhesive side you just exposed.
(2)
Align the Tempered Glass:
Align the tempered glass with your X6100 screen. Keep it
face down as to not attract any dust, and line it up over your X6100.
(3)
Place the Glass on the Screen:
Place the glass on the screen when it is lined up and
press lightly in the middle. Then just put pressure in the middle and watch the screen
adhere itself.
Happy installing!
