Radiocrafts RC2300DK, Руководство пользователя

Страница: 10 / 17

Radiocrafts
Embedded Wireless Solutions
RC2300DK/RC2301DK
©
2007 Radiocrafts AS RC2300DK/RC2301DK Demonstration Kit User Manual (rev. 2.0) Page 10 of 17
I/O mapping
The following table is a summary of the I/O mapping and their connection to the on-board
resources. In the same table the pin usage for the TI/Chipcon CC2430DB is shown for
reference.
I/O port RC2300
pin RC230xDB
Demo Board CC2430DB
TI/Chipcon demo board
P0.0 8 Light dependent resistor (through
jumper) Light dependent resistor
P0.1 9 S1 push button Push button
P0.2 10 I2C_SDA EEPROM SDA
P0.3 11 I2C_SDL EEPROM SCL
P0.4 12 Accelerometer x-axis (through
jumper) Accelerometer x-axis
P0.5 13 Accelerometer y-axis (through
jumper) Accelerometer y-axis
P0.6 14 S2 push button Joystick analogue signal
P0.7 15 Potentiometer analogue input
(through jumper) Potentiometer analogue
input
P1.0 29 D3, Green LED Green LED
P1.1 28 D6, Red LED Red LED
P1.2 27 S3 push button Voltage control for I/O
modules
P1.3 26 S4 push button General purpose I/O
P1.4 25 CTS CTS
P1.5 24 RTS RTS
P1.6 23 TXD TXD
P1.7 22 RXD RXD
P2.0 5 S5 push button Joystick push interrupt
active high
P2.1 4 Debug data Debug data
P2.2 3 Debug Clock Debug Clock
RESET 6 S7 push button, RESET. Pressing
this button will activate the main
RESET of the module RESET