PG
7
Mount the CT32 to Wall
1. Hold the CT32 against the wall, with the wires coming over the top;
above terminal block. The CT32 will cover the hole in the wall.
2. Position CT32 for best
appearance.
3. Attach the CT32 to
the wall with the screws
provided.
4. If you are mounting the
CT32 to sheet rock or if you
are using the old mounting
holes, use the plastic
anchors provided.
5. Mark first and drill a
3/16-in.(4.8mm) hole for
the insert at each screw
location, then mount the
unit.
CT32
Wall
W
ires
Wall
anchor
Place wires inside cover
Screw to wall