Radio Systems Millenium-D Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 94

background image

Radio Systems Millenium-D Digital Console

Page 82

Millenium - Digital Console Software

Overview

Install the Millenium control software in your PC by inserting the CD and clicking on the “INSTALL” icon. Use the in-
cluded RS-232 D to RJ-45 adapter (RS part # 15329) and CAT-5 patch cord to connect the com port of your PC to the
Main RS-232 connector located on the RJ-45 jack on the digital output board.

Multiple Console Connection

Note that the Millenium-D serial line uses the RS-232 multi-drop protocol, allowing one serial line to be connected
in parallel to multiple Millenium-D consoles. Each console must be set with a unique ID #. The last (or only) console
should have the serial port terminated. Consult the “Communications” software page in this section of the manual for
more information.

Establish Communication

On the “Select Console” pull-down menu, select “console 1.”

When communication is established, the top menu bar will immediately display the console number.

If no console number is displayed, check that you have selected com port #1 via your PC set-up, check that RS-232
wiring is accurate, or check the console ID. Consult the “Select Console” software page in this section of the manual for
more information.

Channel Settings

Use this menu to set channel “Cue Exclusive” functions and input and pre-fader levels.

Consult the “Channel Settings” software page in this section of the manual for more information.

Output Level

Use this menu to set analog and digital Program and Utility bus output levels.

Consult the “Output Level” software page in this section of the manual for more information.

Utility Buses

Use this menu to set analog the 10 utility buses main and alternate mix configurations

Consult the “Utility Buses” software page in this section of the manual for more information.

8 Position Switches

Use this menu to program the function of the 8 position switcher on the console front panel.

Consult the example pages which follow this page for suggested applications and the “8 Position Switches” software
page in this section of the manual for more information.

Communications / Serial COM Port / Help Screens

Use these final 3 menus to set com port ID’s, factory defaults and obtain help information. Consult the “Communica-
tions,” “Serial COM Port,” and “Help Screens” software pages in this section of the manual for more information.

«
...
80
81
82
83
84
...
»

Содержание Millenium-D































































































Отзывы:

Нет отзывов

Похожие инструкции для Millenium-D

Бренд: GE Страницы: 242

Бренд: GE Страницы: 24

Бренд: Balanced Body Страницы: 3

Бренд: Labnet Страницы: 5

Бренд: Garmin Страницы: 2

Бренд: Haas Страницы: 12

Бренд: SaMASZ Страницы: 25

Бренд: Tactile Medical Страницы: 23

Бренд: Taarup Страницы: 72

Бренд: Tanaka Страницы: 20

Бренд: Tandem Страницы: 80

Бренд: Tanco Страницы: 4

Бренд: Fast Страницы: 60

Бренд: Wayflex Страницы: 11

Team Agile Color Tune TM16-0

Бренд: GRAU Страницы: 24

Бренд: Maselec Страницы: 6

Бренд: Meyer Страницы: 100

Rovelight RT-400

Бренд: Orlit Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды