Radio Systems Millenium-D, Инструкция по установке и эксплуатации

Страница: 8 / 94

Radio Systems Millenium-D Digital Console Page 8
1.5.8 Headphone Amplifier Output Select
The headphone input select switches on the right-hand side of the console allow monitoring of the PROGRAM buses,
cue and four external stereo inputs which are common to the headphone and monitor circuitry. All headphone outputs
follow these switches. Level adjustment and connection for the operator’s headphones are provided on the front panel.
In addition, a pre-fader headphone output is available for driving an external headphone amplifier.
1.5.9 Remote Control
The Millenium Consoles provide extensive remote control interface ability via a 15 pin D connector located at each mix-
ing channel. Each channel has the capability to remote start almost any source. In addition, each channel provides
inputs for remote control of channel on/off and ready lamp illumination.
Sophisticated control interface is also accommodated via the use of the optional interface card (RS Part# REMOTE).
See Section 2.2.11 and Illustration E-1 for additional information.
Use the included 15-pin D connector ribbon extenders to plug in the mating D connectors external to the console, as
internal clearance for these connectors is not available inside the console.
1.5.10 Eight Position Switcher
Eight accessory switchers are provided on the right-hand side of the console control panel for optional user control of
external equipment, console accessory boards and mix-minus sends. The switches and their associated LED indica-
tors are wired directly to the digital output board and read by the digital processor. Connections for accessory boards
and special external switching are then made directly to connectors J39 and J43 on the digital out-put board. Consult
section 2.3 in the Six Channel Control Board section and diagrams D-3 and D-4 in the Output Board section for more
information.
Consult the “8 Position Switches” page in the “Software” section of this
manual for optional switch functionality assignment.
1.5.11 Console Clock Timer
All Millenium consoles include a Radio Systems CT-2002 clock/timer in the upper right section of the console over-
bridge. Front panel console controls are provided to locally set the time of day and control timer functions. An IR
Remote Control optionally available to set timer down times. Time of Day displays function as clocks or timers and may
also be used as slaved clock display synchronized from either RS Timecode, SMPTE Timecode, or a Top-of-Hour reset
pulse.
Consult illustrations A-1 and A-2 at the end of this section for clock wiring and operation.