10
9. Plug one end of
the coiled hand-
set cord into the
handset jack on
the answering
system and the
other end into the
jack on the hand-
set. Place the
handset in the
cradle.
TURNING OFF/ON THE
RINGER
To turn off the telephone’s ringer, set
RINGER
to
OFF
. You can still make
outgoing calls. If you hear an exten-
sion phone ring, you can still answer
calls.
When you want the telephone to ring
again, set
RINGER
to
ON
.
SETTING THE NUMBER
OF RINGS
You can select the number of rings the
answering system waits before it an-
swers calls. Set
RING SELECT
to the
desired position.
The system answers calls in 2, 4, or 7
rings, or if you set the switch to
TS
(Toll Saver — the last position), the
answering system answers in 4 rings
if no messages are saved or in 2 rings
if you have messages. Toll Saver can
save you long-distance charges be-
cause, if there are no new messages,
you can hang up before the answering
system answers.
SETTING THE DIALING
MODE
Pick up the handset, then set
TONE/
PULSE
for the type of service you
have.
If you are not sure which type you
have, do this test.
1. Pick up the handset and listen for
a dial tone.
2. Set
TONE/PULSE
to
TONE
.
3. Press any number other than
0
.
Содержание TAD-1018
Страница 23: ...23 NOTES...
