![background image](http://html.mh-extra.com/html/radio-shack/pro-2050/pro-2050_owners-manual_779406019.webp)
19
To select another service bank, re-
peatedly press
SVC
until the scanner
displays the name of the bank you
want to use.
Notes:
• To skip data signals (such as
modem signals), press
DATA
. See
“Skipping Data Signals” on
Page 23.
• Because frequencies are not
always assigned to the same ser-
vices everywhere, you might hear
transmissions from one service in
another service group.
Press
SEARCH
to start searching im-
mediately or to continue searching if
you want to skip a frequency.
During service-search, you can press
HOLD
to pause the searching.
HOLD
appears. Press s or t to move up or
down one step, or press
SEARCH
to
resume searching.
Follow these steps to store frequen-
cies into channels.
1. Press
MANUAL
.
2. Use the number keys to enter the
channel number (1–300) where
you want to store the frequency,
then press
MANUAL
.
3. Press
SVC
then
SEARCH
to select a
service bank and begin searching.
4. When the scanner stops on a
transmission, press
HOLD
. The
frequency appears.
5. Press
E
to store the frequency into
the channel.
LIMIT SEARCH
If you do not know a frequency to
store, you can search for transmis-
sions within a range of frequencies
you select, called the
limit search
range. Then you can store any inter-
esting frequencies you find into chan-
nels.
1. Press
MANUAL
, enter the chan-
nel number where you want to
store a frequency, then press
MANUAL
again. The channel num-
ber appears.
2. Use the number keys and
•
to
enter the frequency that is the
lower limit of the range you want
to search.
3. Press
LIMIT.
4. Use the number keys and
•
to
enter the frequency that is the
upper limit of the range you want
to search.
5. Press
LIMIT
, then press
SEARCH
.
The scanner begins to search
from the lower limit to the upper
limit.
6. When the scanner stops on a
transmission, quickly press either:
•
E
to store the displayed fre-
20-430.fm Page 19 Wednesday, August 4, 1999 1:29 PM