5
Install Batteries in the Remote Control
1.
Make sure the remote control is turned off.
2.
Use a screwdriver to open the twin battery compartments. Then insert
four AAA batteries (not included), matching the polarities (
+
and
–
)
marked inside. Replace the cover.
note:
If the remote control’s LED flashes during use, the batteries are low
and should be replaced.
Battery Notes
• Dispose of old batteries promptly and properly. Do not burn or bury them. Use
only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different capacities.
•
Remove batteries during longer storage periods. Batteries can leak chemicals
that can damage electronic parts.
About Expert/ Easy Fly Modes (Ex/Ez)
This drone is designed with 2 flight modes:
Ex
(
expert
) for advanced pilots to fly at a higher speed and
perform stunts.
ez
(
easy
) for beginners and new drone owners. This
operates at a slower speed to help you focus on basic
navigation and develop a feel of the throttle's sensitivity. By default, in Ez
mode, the stunt and speed options are disabled to prevent them from being
accidentally activated.
• When pairing and flying for the first time, we recommend you use
ez
for
test flights and honing your takeoff, steering and landing skills.
Pairing
1.
Turn on the drone. The drone's LEDs flash.
2.
Place the drone on level ground.
6001438_PM_En_for inspection printing.indd 5
7/5/2016 4:33:49 PM
